ci: improve CI stability with parallel builds, Valgrind, and coverage

.gitignore

@@ -62,6 +62,8 @@ tests/unittests/unittests
 tests/unittests/unittests.log
 tests/unittests/unittests.trs
 test-suite.log
+test-files/
+test-logs/
 
 # valgrind output
 profval*
@@ -108,3 +110,7 @@ breaks
 *.zip
 *.log*
 coverage/
+*.gcno
+*.gcda
+*.gcov
+coverage.info

CONTRIBUTING.md

@@ -90,6 +90,15 @@ set -e
 ```
 
 This will run the same tests that the CI runs and refuse the push if it fails.
+The CI script runs 4 parallel builds with different configurations, each with Valgrind and functional tests.
+Build 1 also collects code coverage (lines, functions, branches).
+
+Output shows test results per build:
+```
+✓ Build 1 passed (unit: 437/0, func: 69/0, cov: L:27.5% F:36.2% B:18.1%, 5m39s)
+✓ Build 2 passed (unit: 398/0, func: 69/0, 5m00s)
+```
+
 Note that it will run on the actual content of the repository directory and not
 what may have been staged/committed.
 

Makefile.am

@@ -313,7 +313,7 @@ FUNC_TEST_GROUPS = 1 2 3 4
 
 check-functional-parallel: tests/functionaltests/functionaltests
 	@echo "Running functional tests in parallel ($(words $(FUNC_TEST_GROUPS)) groups)..."
-	@mkdir -p $(builddir)/test-logs
+	@mkdir -p $(builddir)/test-logs $(builddir)/test-files
 	@pids=""; \
 	for g in $(FUNC_TEST_GROUPS); do \
 		./tests/functionaltests/functionaltests $$g > $(builddir)/test-logs/group$$g.log 2>&1 & \
@@ -372,7 +372,10 @@ clean-local:
 	rm -f $(git_include) $(git_include).in
 endif
 
-.PHONY: my-prof.supp
+clean-functional-tests:
+	rm -rf $(builddir)/test-files $(builddir)/test-logs
+
+.PHONY: my-prof.supp clean-functional-tests
 my-prof.supp:
 	@sed '/^# AUTO-GENERATED START/q' prof.supp > $@
 	@printf "\n\n# glib\n" >> $@
@@ -388,7 +391,7 @@ check-unit: tests/unittests/unittests
 	tests/unittests/unittests
 
 @VALGRIND_CHECK_RULES@
-VALGRIND_SUPPRESSIONS_FILES=prof.supp
+VALGRIND_SUPPRESSIONS_FILES=$(srcdir)/prof.supp
 
 # Code coverage targets (requires --enable-coverage)
 coverage-clean:

ci-build.sh

@@ -180,30 +180,13 @@ case "$ARCH" in
         ;;
 esac
 
-case "$ARCH" in
-    linux*)
-         echo
-         echo "--> Building with ./configure -C ${tests[0]} --enable-valgrind $*"
-         echo
-
-         # shellcheck disable=SC2086
-        ./configure -C ${tests[0]} --enable-valgrind $*
-
-        $MAKE CC="${CC}"
-        if grep '^ID=' /etc/os-release | grep -q -e debian; then
-            $MAKE check-valgrind
-        else
-            $MAKE check-valgrind || log_content ./test-suite-memcheck.log
-        fi
-        $MAKE distclean
-        ;;
-esac
-
 # Function to build and test a single configuration
 build_and_test() {
     local features="$1"
     local extra_args="$2"
     local idx="$3"
+    local run_valgrind="$4"
+    local run_coverage="$5"
     local build_dir="build-$idx"
     local log_file="build-$idx.log"
 
@@ -211,14 +194,101 @@ build_and_test() {
         echo "=== Build $idx started at $(date) ==="
         echo "--> Building in $build_dir with ./configure -C $features $extra_args"
 
+        local start_time=$SECONDS
+
         mkdir -p "$build_dir"
         cd "$build_dir"
 
         # shellcheck disable=SC2086
-        ../configure -C $features $extra_args
+        if ! ../configure -C $features $extra_args; then
+            echo "ERROR: configure failed"
+            exit 1
+        fi
 
-        $MAKE CC="${CC}"
+        if ! $MAKE CC="${CC}"; then
-        $MAKE check-functional-parallel
+            echo "ERROR: make failed"
+            exit 1
+        fi
+
+        # Run unit tests under Valgrind
+        local unit_passed=0 unit_failed=0
+        if [ "$run_valgrind" = "yes" ]; then
+            echo "--> Running unit tests under Valgrind..."
+            # Build unit tests first
+            $MAKE tests/unittests/unittests
+            # Run valgrind directly to capture cmocka output
+            valgrind --error-exitcode=1 --leak-check=full \
+                --suppressions=../prof.supp \
+                tests/unittests/unittests 2>&1 | tee unit-tests-output.log
+            valgrind_exit=${PIPESTATUS[0]}
+            if [ $valgrind_exit -ne 0 ]; then
+                echo "ERROR: Valgrind unit tests failed (exit code $valgrind_exit)"
+                exit 1
+            fi
+            # Extract unit test counts from cmocka output
+            unit_passed=$(grep -E "^\[  PASSED  \] [0-9]+ test" unit-tests-output.log | grep -oE "[0-9]+" | head -1)
+            unit_failed=$(grep -E "^\[  FAILED  \] [0-9]+ test" unit-tests-output.log | grep -oE "[0-9]+" | head -1)
+            [ -z "$unit_passed" ] && unit_passed=0
+            [ -z "$unit_failed" ] && unit_failed=0
+            echo "UNIT_TESTS: passed=$unit_passed failed=$unit_failed"
+        fi
+
+        # Set build index for port allocation: build 1 uses ports 5230-5233,
+        # build 2 uses 5234-5237, etc. This prevents port conflicts in parallel builds.
+        export PROF_BUILD_INDEX=$idx
+        local func_passed=0 func_failed=0
+        if ! $MAKE check-functional-parallel; then
+            echo "ERROR: functional tests failed"
+            exit 1
+        fi
+        # Extract functional test counts from group logs
+        echo "=== Functional test results ==="
+        for glog in ./test-logs/group*.log; do
+            if [ -f "$glog" ]; then
+                cnt=$(grep -E "^\[  PASSED  \] [0-9]+ test" "$glog" | grep -oE "[0-9]+" | head -1)
+                [ -n "$cnt" ] && func_passed=$((func_passed + cnt))
+                cnt=$(grep -E "^\[  FAILED  \] [0-9]+ test" "$glog" | grep -oE "[0-9]+" | head -1)
+                [ -n "$cnt" ] && func_failed=$((func_failed + cnt))
+            fi
+        done
+        echo "FUNC_TESTS: passed=$func_passed failed=$func_failed"
+
+        # Collect coverage data if enabled (lines, functions, branches)
+        # Must be done BEFORE make clean which removes .gcda files
+        local cov_lines="n/a" cov_funcs="n/a" cov_branches="n/a"
+        if [ "$run_coverage" = "yes" ]; then
+            echo "--> Collecting coverage data..."
+            if command -v lcov >/dev/null 2>&1; then
+                lcov --capture --directory . --output-file coverage.info \
+                    --rc lcov_branch_coverage=1 --ignore-errors inconsistent 2>&1 || true
+                # Remove test files, stubs, system headers - only keep src/ production code
+                lcov --remove coverage.info \
+                    '/usr/*' \
+                    '*/tests/*' \
+                    '*test*.c' \
+                    '*stub*.c' \
+                    '*/functionaltests/*' \
+                    '*/unittests/*' \
+                    --output-file coverage.info \
+                    --rc lcov_branch_coverage=1 --ignore-errors inconsistent 2>&1 || true
+                if [ -f coverage.info ] && [ -s coverage.info ]; then
+                    local summary
+                    summary=$(lcov --summary coverage.info \
+                        --rc lcov_branch_coverage=1 --ignore-errors inconsistent 2>&1 || true)
+                    cov_lines=$(echo "$summary" | grep -E "lines\.*:" | grep -oE "[0-9]+\.[0-9]+%" | head -1)
+                    cov_funcs=$(echo "$summary" | grep -E "functions\.*:" | grep -oE "[0-9]+\.[0-9]+%" | head -1)
+                    cov_branches=$(echo "$summary" | grep -E "branches\.*:" | grep -oE "[0-9]+\.[0-9]+%" | head -1)
+                    [ -z "$cov_lines" ] && cov_lines="n/a"
+                    [ -z "$cov_funcs" ] && cov_funcs="n/a"
+                    [ -z "$cov_branches" ] && cov_branches="n/a"
+                else
+                    echo "WARNING: coverage.info is empty or not created"
+                fi
+            else
+                echo "WARNING: lcov not found"
+            fi
+            echo "COVERAGE: lines=$cov_lines funcs=$cov_funcs branches=$cov_branches"
+        fi
 
         ./profanity -v
         $MAKE clean
@@ -226,46 +296,103 @@ build_and_test() {
         cd ..
         rm -rf "$build_dir"
 
+        local elapsed=$((SECONDS - start_time))
+        local mins=$((elapsed / 60))
+        local secs=$((elapsed % 60))
+
         echo "=== Build $idx completed at $(date) ==="
+        echo "STATS: unit_passed=$unit_passed unit_failed=$unit_failed func_passed=$func_passed func_failed=$func_failed cov_lines=$cov_lines cov_funcs=$cov_funcs cov_branches=$cov_branches time=${mins}m${secs}s"
     } > "$log_file" 2>&1
 }
 
 # Run all 4 configurations in parallel
-echo "Starting parallel builds..."
+# Coverage enabled only for build 1 (Full) - it has most code paths
+echo
+echo "=== Start build ==="
+echo
+echo "Starting 4 parallel build configurations..."
+echo
 pids=()
 for idx in 1 2 3 4; do
     if [ $idx -le ${#tests[@]} ]; then
-        build_and_test "${tests[$((idx-1))]}" "$*" "$idx" &
+        # All builds run Valgrind
+        if [ "$ARCH" = "linux" ]; then
+            run_valgrind="yes"
+            if [ $idx -eq 1 ]; then
+                extra_flags="--enable-valgrind --enable-coverage"
+                run_coverage="yes"
+            else
+                extra_flags="--enable-valgrind"
+                run_coverage="no"
+            fi
+        else
+            extra_flags=""
+            run_valgrind="no"
+            run_coverage="no"
+        fi
+        build_and_test "${tests[$((idx-1))]}" "$* $extra_flags" "$idx" "$run_valgrind" "$run_coverage" &
         pids+=("$!")
-        echo "Started build $idx (PID: $!)" 
+        flags_desc=""
+        [ "$run_valgrind" = "yes" ] && flags_desc="Valgrind"
+        [ "$run_coverage" = "yes" ] && flags_desc="${flags_desc:+$flags_desc+}Coverage"
+        [ -n "$flags_desc" ] && flags_desc=" [+$flags_desc]"
+        echo "  → Build $idx: ${tests[$((idx-1))]}$flags_desc"
     fi
 done
+echo
 
 # Wait for all builds and check exit codes
-failed=0
+echo "Waiting for builds to complete..."
+echo
+failed_builds=()
 for i in "${!pids[@]}"; do
     idx=$((i + 1))
     if wait "${pids[$i]}"; then
-        echo "✓ Build $idx passed"
+        if [ -f "build-$idx.log" ]; then
+            stats_line=$(grep "^STATS:" "build-$idx.log" | tail -1)
+            unit_p=$(echo "$stats_line" | grep -oE "unit_passed=[0-9]+" | cut -d= -f2)
+            unit_f=$(echo "$stats_line" | grep -oE "unit_failed=[0-9]+" | cut -d= -f2)
+            func_p=$(echo "$stats_line" | grep -oE "func_passed=[0-9]+" | cut -d= -f2)
+            func_f=$(echo "$stats_line" | grep -oE "func_failed=[0-9]+" | cut -d= -f2)
+            cov_lines=$(echo "$stats_line" | grep -oE "cov_lines=[0-9.]+%|cov_lines=n/a" | cut -d= -f2)
+            cov_funcs=$(echo "$stats_line" | grep -oE "cov_funcs=[0-9.]+%|cov_funcs=n/a" | cut -d= -f2)
+            cov_branches=$(echo "$stats_line" | grep -oE "cov_branches=[0-9.]+%|cov_branches=n/a" | cut -d= -f2)
+            time=$(echo "$stats_line" | grep -oE "time=[0-9]+m[0-9]+s" | cut -d= -f2)
+            
+            unit_p=${unit_p:-0}
+            unit_f=${unit_f:-0}
+            func_p=${func_p:-0}
+            func_f=${func_f:-0}
+            
+            echo "✓ BUILD $idx PASSED"
+            echo "  Unit tests:       $unit_p passed, $unit_f failed"
+            echo "  Functional tests: $func_p passed, $func_f failed"
+            if [ "$cov_lines" != "n/a" ] && [ -n "$cov_lines" ]; then
+                echo "  Coverage:         Lines: $cov_lines | Functions: $cov_funcs | Branches: $cov_branches"
+            fi
+            echo "  Duration:         ${time:-?}"
+        else
+            echo "✓ Build $idx passed (no stats available)"
+        fi
     else
-        echo "✗ Build $idx failed"
+        echo "✗ BUILD $idx FAILED"
-        echo "--- Log for build $idx ---"
+        failed_builds+=("$idx")
+    fi
+    echo
+done
+
+# Show failed builds full logs
+for idx in "${failed_builds[@]}"; do
+    if [ -f "build-$idx.log" ]; then
+        echo "=== BUILD $idx FAILURE LOG ==="
         cat "build-$idx.log"
-        echo "--- End log ---"
+        echo
-        failed=1
     fi
 done
 
-# Show all logs on success too
+if [ ${#failed_builds[@]} -gt 0 ]; then
-if [ $failed -eq 0 ]; then
+    echo "RESULT: FAILED (builds ${failed_builds[*]})"
-    echo
-    echo "All builds passed!"
-    for idx in 1 2 3 4; do
-        if [ -f "build-$idx.log" ]; then
-            echo "--- Log for build $idx ---"
-            cat "build-$idx.log"
-        fi
-    done
-else
     exit 1
+else
+    echo "RESULT: ALL 4 BUILDS PASSED ✓"
 fi

prof.supp

@@ -8,6 +8,29 @@
 # * python suppressions file from https://github.com/python/cpython/blob/main/Misc/valgrind-python.supp
 #
 
+# ============================================
+# glibc AVX2 optimizations (false positives)
+# See: https://sourceware.org/bugzilla/show_bug.cgi?id=19796
+# ============================================
+
+{
+  glibc_wcpncpy_avx2
+  Memcheck:Addr32
+  fun:__wcpncpy_avx2
+  fun:wcsxfrm_l
+  fun:g_utf8_collate_key
+  ...
+}
+
+{
+  glibc_wcsxfrm_avx2
+  Memcheck:Addr32
+  ...
+  fun:wcsxfrm_l
+  fun:g_utf8_collate_key
+  ...
+}
+
 # ============================================
 # Functional tests suppressions (stabber/pthread)
 # ============================================

tests/functionaltests/functionaltests.c

@@ -69,6 +69,12 @@ main(int argc, char* argv[])
         }
     }
 
+    char group_env[16];
+    snprintf(group_env, sizeof(group_env), "%d", group);
+    setenv("PROF_TEST_GROUP", group_env, 1);
+    
+    fprintf(stderr, "[PROF_TEST] Starting functional tests, group=%d\n", group);
+
     /* ============================================================
      * GROUP 1: Connect, Ping, Rooms, Software
      * Basic XMPP session establishment and server queries

tests/functionaltests/proftest.c

@@ -136,8 +136,14 @@ _create_logs_dir(void)
 void
 _cleanup_dirs(void)
 {
+    const char *group_env = getenv("PROF_TEST_GROUP");
+    int group = group_env ? atoi(group_env) : 0;
+    int dir_id = (group >= 1 && group <= 4) ? group : stub_port;
+    
+    fprintf(stderr, "[PROF_TEST] Cleaning up directories for group %d (dir_id %d)\n", group, dir_id);
+    
     char cmd[512];
-    snprintf(cmd, sizeof(cmd), "rm -rf ./tests/functionaltests/files/%d", stub_port);
+    snprintf(cmd, sizeof(cmd), "rm -rf ./test-files/%d", dir_id);
     int res = system(cmd);
     if (res == -1) {
         assert_true(FALSE);
@@ -221,30 +227,73 @@ prof_start(void)
     /* Set non-blocking mode for reading */
     int flags = fcntl(fd, F_GETFL, 0);
     fcntl(fd, F_SETFL, flags | O_NONBLOCK);
+    
+    /* Brief wait for process to initialize */
+    usleep(50000);  /* 50ms */
 }
 
 int
 init_prof_test(void **state)
 {
+    /* Get test group from environment for static resource allocation */
+    const char *group_env = getenv("PROF_TEST_GROUP");
+    int group = group_env ? atoi(group_env) : 0;
+    
+    /* Get build index for port offset (for parallel CI builds) */
+    const char *build_env = getenv("PROF_BUILD_INDEX");
+    int build_idx = build_env ? atoi(build_env) : 0;
+    
+    /* Calculate port base: each build uses a different range of 4 ports
+     * Build 0/1: 5230-5233, Build 2: 5234-5237, Build 3: 5238-5241, Build 4: 5242-5245 */
+    int port_base = 5230 + ((build_idx > 0 ? build_idx - 1 : 0) * 4);
+    
+    /* Static resource allocation to avoid conflicts in parallel execution.
+     * Group 1-4: use static port assignment.
+     * Group 0 (all groups): use dynamic allocation as fallback. */
     gboolean started = FALSE;
-    for (int p = 5230; p < 5250; ++p) {
+    
-        int ret = stbbr_start(STBBR_LOGDEBUG, p, 0);
+    if (group >= 1 && group <= 4) {
-        if (ret == 0) {
+        /* Static allocation: each group gets a dedicated port */
-            stub_port = p;
+        stub_port = port_base + group - 1;
+        fprintf(stderr, "[PROF_TEST] Build %d, Group %d: trying port %d\n", build_idx, group, stub_port);
+        
+        if (stbbr_start(STBBR_LOGDEBUG, stub_port, 0) == 0) {
             started = TRUE;
-            break;
+            fprintf(stderr, "[PROF_TEST] Started stabber on port %d\n", stub_port);
+        } else {
+            fprintf(stderr, "[PROF_TEST] Failed to start stabber on port %d\n", stub_port);
         }
     }
+    
+    /* Fallback to dynamic allocation if static failed or group=0 */
     if (!started) {
-        assert_true(FALSE); // could not start stabber on any port in range
+        fprintf(stderr, "[PROF_TEST] Using dynamic port allocation\n");
+        for (int p = port_base; p < port_base + 20; ++p) {
+            if (stbbr_start(STBBR_LOGDEBUG, p, 0) == 0) {
+                stub_port = p;
+                started = TRUE;
+                fprintf(stderr, "[PROF_TEST] Started stabber on port %d\n", stub_port);
+                break;
+            }
+        }
+    }
+    
+    if (!started) {
+        fprintf(stderr, "[PROF_TEST] ERROR: could not start stabber on any port\n");
+        assert_true(FALSE);
         return -1;
     }
 
-    // Generate unique XDG paths based on stub_port for parallel execution
+    // Generate unique XDG paths based on group for parallel execution
+    // Use ./test-files/ in current (build) directory for out-of-tree builds compatibility
+    int dir_id = (group >= 1 && group <= 4) ? group : stub_port;
     snprintf(xdg_config_home, sizeof(xdg_config_home),
-             "./tests/functionaltests/files/%d/xdg_config_home", stub_port);
+             "./test-files/%d/xdg_config_home", dir_id);
     snprintf(xdg_data_home, sizeof(xdg_data_home),
-             "./tests/functionaltests/files/%d/xdg_data_home", stub_port);
+             "./test-files/%d/xdg_data_home", dir_id);
+    
+    fprintf(stderr, "[PROF_TEST] Group %d using directories: config=%s, data=%s\n", 
+            group, xdg_config_home, xdg_data_home);
 
     // Give stabber server thread time to start listening
     usleep(100000); // 100ms
@@ -398,9 +447,19 @@ prof_output_regex(const char *pattern)
             return 1;
         }
         
-        usleep(50000);  /* 50ms */
+        usleep(50000);
     }
     
+    /* Timeout reached - log diagnostic info */
+    fprintf(stderr, "Timeout waiting for regex '%s' after %d seconds. Last output:\n", pattern, expect_timeout);
+    size_t len = strlen(output_buffer);
+    if (len > 500) {
+        fprintf(stderr, "...%s", output_buffer + len - 500);
+    } else {
+        fprintf(stderr, "%s", output_buffer);
+    }
+    fprintf(stderr, "\n");
+    
     regfree(&regex);
     return 0;
 }