perf(functests): speedup — profrc pre-baking, pty-close shutdown, parallel port pools

Replace 16 interactive UI setup commands with pre-written profrc file
containing [ui] and [notifications] sections (~1800ms saved per test).

Replace sleep(1) + blocking waitpid with close(pty fd) → SIGHUP →
polling waitpid(WNOHANG) → SIGTERM/SIGKILL fallback chain (~4900ms
saved per test).

Remove post-stbbr_start() and post-stbbr_stop() sleeps — bind+listen
completes synchronously before stbbr_start() returns, and
pthread_join() in stbbr_stop() guarantees socket cleanup (~200ms saved).

Add PORTS_PER_GROUP=50 isolated port ranges per test group to enable
safe parallel execution of 4 groups without port conflicts.

tests/functionaltests/proftest.c

@@ -12,6 +12,7 @@
 #include <fcntl.h>
 #include <sys/select.h>
 #include <regex.h>
+#include <signal.h>
 
 #include <stabber.h>
 
@@ -20,6 +21,14 @@
 /* Number of parallel test groups for CI builds */
 #define TEST_GROUPS 4
 
+/* Number of ports reserved per test group; allows skipping TIME_WAIT ports */
+#define PORTS_PER_GROUP 50
+
+/* Shutdown polling: interval and maximum attempts before escalating signals */
+#define SHUTDOWN_POLL_MS   50
+#define SHUTDOWN_POLL_MAX  100   /* 100 x 50ms = 5s */
+#define SIGTERM_POLL_MAX   20    /*  20 x 50ms = 1s */
+
 char *config_orig;
 char *data_orig;
 
@@ -246,38 +255,41 @@ init_prof_test(void **state)
     const char *build_env = getenv("PROF_BUILD_INDEX");
     int build_idx = build_env ? atoi(build_env) : 0;
     
-    /* Calculate port base: each build uses a different range of TEST_GROUPS ports.
-     * Build 0 (local/default): 5230-5233, Full: 5230-5233, Minimal: 5234-5237, etc.
-     * Build 0 and Full share the same range because build 0 is for local runs or sequential run (no parallel builds),
-     * while Full/Minimal/NoEncrypt/Default are used in CI where they run in parallel. */
-    int port_base = 5230 + ((build_idx > 0 ? build_idx - 1 : 0) * TEST_GROUPS);
+    /* Calculate port base: each build uses a different range of
+     * TEST_GROUPS * PORTS_PER_GROUP ports.
+     * Build 0 (local/default): 5230-5429, Full: 5230-5429, Minimal: 5430-5629, etc.
+     * Build 0 and Full share the same range because build 0 is for local runs
+     * or sequential run (no parallel builds), while Full/Minimal/NoEncrypt/Default
+     * are used in CI where they run in parallel. */
+    int port_base = 5230 + ((build_idx > 0 ? build_idx - 1 : 0) * TEST_GROUPS * PORTS_PER_GROUP);
     
-    /* Static resource allocation to avoid conflicts in parallel execution.
-     * Group 1-4: use static port assignment.
-     * Group 0 (all groups): use dynamic allocation as fallback. */
+    /* Each group gets a dedicated range of ports for parallel execution.
+     * Group 1: port_base..port_base+PORTS_PER_GROUP-1
+     * Group 2: port_base+PORTS_PER_GROUP..port_base+2*PORTS_PER_GROUP-1, etc.
+     * Ports in TIME_WAIT from previous tests are skipped automatically. */
     gboolean started = FALSE;
-    
+
     if (group >= 1 && group <= TEST_GROUPS) {
-        /* Static allocation: each group gets a dedicated port */
-        stub_port = port_base + group - 1;
-        printf("[PROF_TEST] Build %d, Group %d: trying port %d\n", build_idx, group, stub_port);
-        
-        if (stbbr_start(STBBR_LOGDEBUG, stub_port, 0) == 0) {
-            started = TRUE;
-            printf("[PROF_TEST] Started stabber on port %d\n", stub_port);
-        } else {
-            printf("[PROF_TEST] Failed to start stabber on port %d\n", stub_port);
-        }
-    }
-    
-    /* Fallback to dynamic allocation if static failed or group=0 */
-    if (!started) {
-        printf("[PROF_TEST] Using dynamic port allocation\n");
-        for (int p = port_base; p < port_base + 20; ++p) {
+        int group_port_base = port_base + (group - 1) * PORTS_PER_GROUP;
+
+        for (int p = group_port_base; p < group_port_base + PORTS_PER_GROUP && !started; p++) {
+            if (stbbr_start(STBBR_LOGDEBUG, p, 0) == 0) {
+                stub_port = p;
+                started = TRUE;
+            }
+        }
+        if (!started) {
+            fprintf(stderr, "[PROF_TEST] Failed to start stabber on ports %d-%d\n",
+                    group_port_base, group_port_base + PORTS_PER_GROUP - 1);
+        }
+    }
+
+    /* Fallback to dynamic allocation if static failed or group=0 */
+    if (!started) {
+        for (int p = port_base; p < port_base + 200; ++p) {
             if (stbbr_start(STBBR_LOGDEBUG, p, 0) == 0) {
                 stub_port = p;
                 started = TRUE;
-                printf("[PROF_TEST] Started stabber on port %d\n", stub_port);
                 break;
             }
         }
@@ -299,8 +311,8 @@ init_prof_test(void **state)
     printf("[PROF_TEST] Group %d using directories: config=%s, data=%s\n", 
            group, xdg_config_home, xdg_data_home);
 
-    // Give stabber server thread time to start listening
-    usleep(100000); // 100ms
+    /* No sleep needed: server_run() completes bind()+listen() before returning.
+     * Incoming connections queue in kernel backlog until accept() runs. */
 
     config_orig = getenv("XDG_CONFIG_HOME");
     data_orig = getenv("XDG_DATA_HOME");
@@ -315,38 +327,37 @@ init_prof_test(void **state)
     _create_chatlogs_dir();
     _create_logs_dir();
 
+    /* Pre-write profrc with UI/notification defaults to ensure consistent,
+     * deterministic output across tests (no timestamps, no roster/occupants
+     * panels, low input-blocking delay for fast command processing). */
+    char profrc_path[512];
+    snprintf(profrc_path, sizeof(profrc_path),
+             "%s/profanity/profrc", xdg_config_home);
+    FILE* prc = fopen(profrc_path, "w");
+    if (prc) {
+        fprintf(prc,
+                "[ui]\n"
+                "inpblock=5\n"
+                "inpblock.dynamic=false\n"
+                "wrap=false\n"
+                "roster=false\n"
+                "occupants=false\n"
+                "time.console=off\n"
+                "time.chat=off\n"
+                "time.muc=off\n"
+                "time.config=off\n"
+                "time.private=off\n"
+                "time.xmlconsole=off\n"
+                "[notifications]\n"
+                "message=false\n"
+                "room=false\n");
+        fclose(prc);
+    }
+
     prof_start();
     int prof_started = prof_output_regex("CProof\\. Type /help for help information\\.");
     assert_true(prof_started);
 
-    // set UI options to make expect assertions faster and more reliable
-    prof_input("/inpblock timeout 5");
-    assert_true(prof_output_regex("Input blocking set to 5 milliseconds"));
-    prof_input("/inpblock dynamic off");
-    assert_true(prof_output_regex("Dynamic input blocking disabled"));
-    prof_input("/notify chat off");
-    assert_true(prof_output_regex("Chat notifications disabled"));
-    prof_input("/notify room off");
-    assert_true(prof_output_regex("Room notifications disabled"));
-    prof_input("/wrap off");
-    assert_true(prof_output_regex("Word wrap disabled"));
-    prof_input("/roster hide");
-    assert_true(prof_output_regex("Roster disabled"));
-    prof_input("/occupants default hide");
-    assert_true(prof_output_regex("Occupant list disabled"));
-    prof_input("/time console off");
-    prof_input("/time console off");
-    assert_true(prof_output_regex("Console time display disabled\\."));
-    prof_input("/time chat off");
-    assert_true(prof_output_regex("Chat time display disabled\\."));
-    prof_input("/time muc off");
-    assert_true(prof_output_regex("MUC time display disabled\\."));
-    prof_input("/time config off");
-    assert_true(prof_output_regex("Config time display disabled\\."));
-    prof_input("/time private off");
-    assert_true(prof_output_regex("Private chat time display disabled\\."));
-    prof_input("/time xml off");
-    assert_true(prof_output_regex("XML Console time display disabled\\."));
     return 0;
 }
 
@@ -355,11 +366,31 @@ close_prof_test(void **state)
 {
     if (fd > 0 && child_pid > 0) {
         prof_input("/quit");
-        // Give profanity time to process quit command
-        sleep(1);
-        waitpid(child_pid, NULL, 0);
+        /* Close pty master after brief grace — child gets SIGHUP which
+         * accelerates shutdown instead of waiting for XMPP disconnect
+         * timeout (~5s). */
+        usleep(100000); /* 100ms grace for /quit to be read from pty buffer */
         close(fd);
         fd = 0;
+        int exited = 0;
+        for (int i = 0; i < SHUTDOWN_POLL_MAX; i++) {
+            if (waitpid(child_pid, NULL, WNOHANG) != 0) {
+                exited = 1;
+                break;
+            }
+            usleep(SHUTDOWN_POLL_MS * 1000);
+        }
+        if (!exited) {
+            kill(child_pid, SIGTERM);
+            for (int i = 0; i < SIGTERM_POLL_MAX; i++) {
+                if (waitpid(child_pid, NULL, WNOHANG) != 0) { exited = 1; break; }
+                usleep(SHUTDOWN_POLL_MS * 1000);
+            }
+            if (!exited) {
+                kill(child_pid, SIGKILL);
+                waitpid(child_pid, NULL, 0);
+            }
+        }
         child_pid = 0;
     }
 
@@ -371,13 +402,6 @@ close_prof_test(void **state)
     }
 
     stbbr_stop();
-    /*
-     * TODO: Replace with proper synchronization.
-     * stabber doesn't provide wait_stopped() API yet, so we use delay
-     * to ensure the port is released before the next test starts.
-     * See: https://git.jabber.space/devs/stabber/issues/3
-     */
-    usleep(100000);  // 100ms
     return 0;
 }